|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
 ;
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
;
Very good manual, at a very good price. Received in a timely manner
;
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
;
Had everything I needed. Onyly took a few hours after paid for by PayPal. The copy was very readable.
ADJUSTMENT INSTRUCTIONS
1. Application Object
These instructions are applied to all of the color TV, MC-05HA chassis. 8) After checking �40�, Click the Erase Flash button.
2. Notes
(1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order.But the adjustment can be changed by consideration of mass production. (3) The adjustment must be performed in the circumstance of 25±5°C of temperature and 65±10% of relative humidity if there is no specific designation. (4) The input AC voltage of the receiver must keep rating voltage in adjusting. (5) The receiver must be operated for about 15 minutes prior to the adjustment.
9) Double click �Edit Window�.
3. Soft ware download
1) Connect JIG to P004 of Digital Board. 2) Connect SCL line of JIG Switch to Ground. 3) Turn on JIG and supply 6V to Digital Board. Terminate the SCL of clause 2) by using Switch. 4) After termination of SCL line, wait for 3 second. 5) Execute �vct69xyp_main_graphic.vi2c� program. 6) Click the TVT button.
10) Click the file select button of Name to select file.
7) Double click right check box of �Boot loader Version� line, and then check to change to 40 from 0.
11) Select necessary file.
-8-
|
|
|
> |
|
